Crashcart Start your free trial

IT without an IT person

Guest Wi-Fi on a separate network for a small office

To put guest Wi-Fi on a separate network in a small office, turn on your router's guest network, give it its own password, and make sure the setting that lets guests reach your local network is off. Office computers and printers stay on the main network, and card terminals belong on a network of their own, which usually takes a business router. Then test it by connecting a phone to the guest Wi-Fi and typing the office printer's address into its browser. If the printer's page loads, the networks aren't separate.

Wi-Fi and the network are one of the recurring jobs in running IT for a small office without an IT person. This post covers the guest side of that job: what the settings mean, what goes where, and how to prove the wall holds.

What is a guest network?

A guest network is a second Wi-Fi network from the same router, with its own name and password, that gives devices internet access without access to the computers and printers on your main network. CISA's guide to securing home Wi-Fi says anyone who doesn't routinely connect to your network should use the guest Wi-Fi. It also recommends putting smart devices there when internet access is all they need, which keeps them from "discovering other devices" on your network.

For organizations, CISA's Cross-Sector Cybersecurity Performance Goals 2.0 (December 2025) recommends dividing networks by trust and device type, naming guests as one of the types, and allowing "only required communications between segments." A visitor's phone needs the internet. It doesn't need your file server.

In a small office, the guest network is for visitors, clients in the waiting room, and staff members' personal phones and tablets. Everything the business owns and uses for work stays off it.

What client isolation and AP isolation mean

Two different walls get called isolation, and routers name them differently:

  • Guests kept off the local network. Devices on the guest Wi-Fi can reach the internet but not your computers, printers or anything plugged into the router. This is the wall that matters most.
  • Guests kept apart from each other. One guest's laptop can't see another guest's phone. This is what "client isolation" and "AP isolation" usually mean. AP stands for access point, the box that broadcasts the Wi-Fi.

The second doesn't give you the first. Ubiquiti's UniFi documentation separates them clearly. Its Client Device Isolation setting "blocks communication within a single Access Point," while a different setting, Network Isolation, blocks traffic between the guest network and your other networks. Turning on client isolation alone doesn't keep guests off your office network.

What do routers call these settings?

Router menus vary by brand and model, so no single set of steps fits every office. On October 18, 2026, we read the guest network help pages of five makers of small-office routers and access points, eight pages in all, and wrote down what each calls the two walls and what it says the default is.

Maker and page Guests reaching the local network Guests reaching each other Default stated
NETGEAR, Orbi "Allow guests to see each other and access my local network" (one checkbox for both) Same checkbox Cleared, so guests are blocked
NETGEAR, Nighthawk No setting named; the page says guest and primary devices can't reach each other Not described Separation is built in
TP-Link, Archer A7 and C7 "Allow guests to access my local network" "Allow guests to see each other" Not stated
ASUS, guest network and deny access FAQs "Access Intranet" Not described Off, so guests are blocked
Ubiquiti UniFi, isolation and guest Wi-Fi "Network Isolation" "Client Device Isolation," plus "Device Isolation (ACL)" on switches Not stated
Cisco Meraki, guest and internal networks Firewall rule "Wireless clients accessing LAN," set to Deny "NAT mode: Use Meraki DHCP," where clients can't communicate Not stated

Across the eight pages we counted nine different setting names. The phrase "AP isolation" appears on none of them, and "client isolation" only on Ubiquiti's two. Only two makers state a default for guest access to the local network, NETGEAR's Orbi page and ASUS, and both default to blocking it. So the setting you're looking for is whichever one controls guests reaching the local network, whatever your router calls it, and you check it rather than assume the default.

One more finding from the ASUS FAQ. Access Intranet "only works in Wireless router mode." On an ASUS unit set up as an access point behind the internet provider's box, the option doesn't exist, because the box in front hands out the addresses. Other makers' gear may work the same way, so check which box is doing the routing before you go looking.

Which devices go on which network

A small office usually needs two networks, and three if it takes cards on a terminal that connects over the internet.

Network What goes on it
Office Work computers, printers and scanners, the server or network storage, the phone system if it uses the network
Guest Visitors, clients, staff members' personal phones and tablets, smart TVs and gadgets that only need the internet
Payments Card terminals, and nothing else

Printers go on the office network because staff print to them. Keeping them off the guest network is what stops a visitor from sending jobs to them or opening their settings page.

A guest network limits what a visitor's device can reach. It doesn't tell you whether one of your own computers has been compromised, which is what security monitoring for small businesses covers.

Why card terminals need their own network

PCI DSS, the card industry's security standard, restricts what can reach the systems that handle card data. In the PCI DSS v4.0.1 questionnaire for terminals that connect over the internet, SAQ B-IP, requirement 1.3 reads: "Network access to and from the cardholder data environment is restricted." Requirement 1.3.3 adds that network security controls sit "between all wireless networks" and the card environment, with wireless traffic into it "denied by default" (PCI SSC document library).

The same SAQ's eligibility criteria say the terminals are "not connected to any other systems within the merchant environment," which it says network segmentation can achieve. A footnote allows several terminals to share a network as long as they're isolated from other types of systems.

That rules out two setups. A terminal on the guest Wi-Fi shares a network with customers' phones. A terminal plugged into the router next to the office computers shares the local network with them. On the TP-Link page above, the local network a guest network is kept away from includes the router's wired ports. A guest network keeps visitors away from the terminal, but it doesn't keep the terminal apart from your computers. That takes a separate network for payments.

Which questionnaire applies to you depends on how you take cards, and which PCI SAQ applies to your business walks through it. The PCI compliance guide for small businesses covers the rest of what the standard asks, including the penetration test of the separation that SAQ B-IP requires at least once every 12 months when you rely on it (requirement 11.4.5).

How to set up guest Wi-Fi on a separate network

The names differ, but the steps are the same on most routers an office buys at a store or gets from a provider.

  1. Log in to the router. The address is usually on the label or in the maker's app. NETGEAR Nighthawk routers use routerlogin.net, TP-Link uses tplinkwifi.net and ASUS uses asusrouter.com, according to their pages above.
  2. Find the guest network page. It's called Guest Network on all three, or Network on newer ASUS firmware.
  3. Turn it on and name it something your visitors will recognize, different from the office network's name.
  4. Set security to WPA2 or WPA3 with its own password, never the office password. CISA's guide asks for one that is long, random and unique.
  5. Turn off guest access to the local network, using the setting from the table that matches your router.
  6. Decide whether guests should see each other. In a waiting room, they shouldn't. Turn on the guest-to-guest block if your router has one.
  7. Save, then test as described below.

Post the guest password where visitors can see it. Change it when you like, since nobody's work depends on it. The office password is the one to change when someone who knew it leaves.

How to check that guest Wi-Fi can't reach the office

Do this test after setting up the guest network, after any router firmware update or replacement, and once a year.

  1. Find an office device's address. The printer is the easiest. Its network settings screen or printed configuration report shows an IP address such as 192.168.1.50.
  2. Prove the test works. On a phone connected to the office Wi-Fi, type that address into the browser, starting with http://. The printer's page should load.
  3. Switch the phone to the guest Wi-Fi and turn off its cellular data so it can't reach the address another way.
  4. Type the same address again. The page should fail to load. If it loads, guests can reach your office network, and the local network setting from the setup steps is on or missing.

A Windows laptop on the guest Wi-Fi gives a clearer answer. In PowerShell, run Test-NetConnection 192.168.1.50 -Port 80 with your printer's address. Microsoft's Test-NetConnection documentation shows the two results to read. On the guest network, PingSucceeded and TcpTestSucceeded should both say False.

Test a wired device too, such as network storage or a desktop with a shared folder. On the TP-Link page, the local network includes the router's wired ports, which is where a printer, storage box or terminal plugged into the router sits.

VLANs for offices with a business router

A VLAN, or virtual LAN, is a separate network that runs over the same router, switches and access points as your others. A business router or firewall can carry an office VLAN, a guest VLAN and a payments VLAN at once, with firewall rules deciding what may cross between them. This is how an office gives card terminals their own network without running new cable.

Each maker builds it differently. In UniFi, you create a network for each VLAN under Settings, Networks, turn on Network Isolation for the guest one, and assign it to the guest Wi-Fi under Settings, WiFi (UniFi guest Wi-Fi best practices). Meraki's guide sets the guest network's firewall rule for Wireless clients accessing LAN to Deny. Business routers from other makers have their own menus, so use the maker's guide for your model.

Two things to get in writing from whoever sets it up. First, which switch ports carry which VLAN, so the terminal plugged into the wrong port doesn't land on the office network. Second, the rules between VLANs, so the payments network reaches only the processor. If a provider or vendor manages the router, ask them to send both.

Keeping the networks apart

Separation breaks quietly. A new router goes in with default settings, someone plugs the terminal into a free port, or a firmware update resets the guest page. Repeating the test after each router change, and once a year, catches all three.

Crashcart lists every device on your office network, tells you when a new one appears, and checks every day what the internet can see at your address. Its IT Manager walks you through putting guest Wi-Fi on a network that can't reach your computers or card terminals, and checks with you once a year that it still is. You make the changes on your router's own settings page, and the router stays yours to manage.

Guest Wi-Fi checklist

  • [ ] Guest network turned on, with its own name and a long, random password.
  • [ ] Guest access to the local network turned off, under whatever name your router uses.
  • [ ] Guests blocked from seeing each other, if the router offers it.
  • [ ] Work computers, printers and storage on the office network only.
  • [ ] Visitors, personal phones and gadgets on the guest network only.
  • [ ] Card terminals on their own network, not the guest Wi-Fi and not the office network.
  • [ ] Phone test passed: the printer's page loads on the office Wi-Fi and fails on the guest Wi-Fi.
  • [ ] Wired device tested from the guest network too.
  • [ ] Switch ports and VLAN rules written down, if you have a business router.
  • [ ] Test repeated after any router change, and once a year.

More in this topic

Crashcart runs IT and security for small offices for $35 a computer a month. Start a 14-day free trial.